Skip to Content

FrenchCreek AF390AKDLZ Dual-Leg Arc Flash Shock-Absorbing Lanyard, 6 ft

The FrenchCreek AF390AKDLZ Dual-Leg Arc Flash Lanyard is designed for electrical utility professionals, linemen, and industrial workers who require fall protection in environments where electrical arc-flash hazards may be present.

Constructed with heat- and flame-resistant Kevlar webbing, this 6-foot shock-absorbing lanyard features a dual-leg configuration designed to support 100% tie-off during transitions between approved anchorage points. Its pack-style shock absorber helps manage fall-arrest forces, while flame-resistant protective covers provide additional protection for the shock pack and identification labels.

The lanyard incorporates a harness choke-loop connection and Z74 locking snap hooks with 3/4-inch gate openings.

Key Features

  • Dual-leg design for continuous tie-off during approved anchorage transitions.

  • 6-foot Kevlar shock-absorbing lanyard.

  • Heat- and flame-resistant Kevlar webbing.

  • Pack-style energy absorber.

  • Flame-resistant shock-pack and identification-label cover.

  • Harness choke-loop connection.

  • Z74 locking snap hooks with 3/4-inch gate openings.

  • Arc-rated fabric tested to 8.6 cal/cm² under ASTM F1959.

  • Manufacturer identifies the fabric as ASTM F1506 compliant and NFPA 70E Category 2 rated.

Technical Specifications

SpecificationDetails
ManufacturerFrenchCreek Fall Safety
Manufacturer Part NumberAF390AKDLZ
Lanyard TypeDual-Leg Arc Flash Shock-Absorbing Lanyard
Length6 ft
Webbing MaterialKevlar
Shock AbsorberPack-Style
Harness ConnectionChoke Loop
Anchorage ConnectionZ74 Locking Snap Hook
Snap Hook Gate Opening3/4 in.
ANSI Capacity130–310 lb
OSHA CapacityUp to 400 lb
Fabric Arc Rating8.6 cal/cm²

Applications

  • Electrical utility and power distribution work.

  • Lineman fall protection.

  • Electrical infrastructure maintenance.

  • Elevated industrial maintenance.

  • Utility construction and equipment servicing.

  • Work requiring continuous tie-off and arc-flash-rated materials.

Safety and Compliance

FrenchCreek lists ASTM F887-13 and ANSI Z359.1 among the applicable standards, along with OSHA electrical utility requirements.

The fabric's arc rating does not establish an arc rating for the entire fall-protection system. Always verify compatibility with the selected harness, anchorage, and connecting equipment, and follow the manufacturer's instructions and applicable fall-protection requirements.

The AF390AKDLZ is intended for trained personnel using properly selected fall-arrest systems.

$ 295.05 $ 295.05